XCMG
XCMG Motor Grader GR2153
Model: GR2153
Engine Model: CUMMINS QSB6.7-C220
Rated Power: 164 KW/220 HP
Middle Blade Size: 4,270mm × 610mm
Operating Weight: 16,500 KG
Send Inquiry
Engine Model: CUMMINS QSB6.7-C220
Rated Power: 164 KW/220 HP
Middle Blade Size: 4,270mm × 610mm
Operating Weight: 16,500 KG
Description
Gallery
1.Energy-saving and noise-reducing: adopt low-speed engine transmission line, low specific fuel consumption of rated point, energy saving and environmental protection; low-speed ratio configuration of transmission system, average fuel consumption reduced by about 8%.
2.Strong Power: Adopting Sichai High-efficiency State III Variable Power Engine.
3.With load rotation: to improve the hydraulic system pressure, blade rotary force greatly improved, high-frequency quenching gear ring,
wear resistance and life expectancy, to achieve load rotation.
4.Efficient operation: The displacement of the hydraulic pump and the hydraulic motor is increased, the speed of the cylinder is increased by 20%, and the operating efficiency leads the industry.
| Description | Unit | Parameter value | ||
| Engine model | QSB6.7 | |||
| Rated power/speed | kW/rpm | 164/2000 | ||
| Overall dimension (standard) | 8970x2625x3420 | |||
| Total weight (standard) | kg | 16500 | ||
| Tire specification | 17.5-25 | |||
| Ground clearance (front axle) | mm | 430 | ||
| Tread | mm | 2156 | ||
| Space of front and rear axles | mm | 6219 | ||
| Space of middle and rear wheels | mm | 1538 | ||
| Forward velocity | km/h | 5/8/11/19/23/38 | ||
| Reverse speed | km/h | 2005/11/23 | ||
| Tractive effort f=0.75 | kN | 85 | ||
| Maximum gradeability | % | ≥25 | ||
| Tire inflation pressure | kPa | 260 | ||
| Working system pressure | MPa | 20 | ||
| Transmission pressure | MPa | 1.3—1.8 | ||
| Maximum steering angle of front wheel | ±48° | |||
| Maximum slant angle of front wheel | ±17° | |||
| Maximum oscillating angle of front axle | ±15° | |||
| Maximum oscillating angle of equilibrium box | Front15°,Rear15° | |||
| Maximum steering angle of frame | ±27° | |||
| Minimum turning radius | m | 7.3 | ||
| Scrape knife | Maximum lift height | mm | 400 | |
| Maximum cutting depth | mm | 500 | ||
| Maximum tilt angle | 90° | |||
| Cutting angle | 28°—70° | |||
| Angle of revolution | 360° | |||
| Length & chord height | mm | 4270x610 | ||
| Coolant | L | 50 | ||
| Fuel tank | L | 280 | ||
| Engine | L | 24 | ||
| Transmission | L | 38 | ||
| Hydraulic oil | L | 110 | ||
| Drive axle | L | 28 | ||
| Balancing box | L | 46 | ||
